INTRODUCTION:
Please read this user manual carefully before using the product.
The product is a solar power system that you can use to power small electronics such as: LED lamps, mobile phones, auto
electronics and others.
FEATURES:
•
3 x 12V outputs (30W max) and 2 x USB 5V/1A outputs
•
LED indicators for battery charge level, charging status and load
•
Protection circuits for reverse connection, overcharge and overload
•
Protection in case of full battery discharge
•
FM radio and MP3 player
•
SD card and USB inputs
•
7Ah/12V battery included
SAFETY NOTICE:
Do not use the product in areas with high themperatures, fire or explosion hazard
The product supports a maximum load of 30W, please check the consumption of the electronics you want to power before
connecting them to the charge unit.
PACKAGE CONTENT:
•
Charge unit
•
Solar panel ( 6m cable)
•
2 x LED lamps (4m cables)
•
Multifunctional cable for small electronics (mobile phone, tablet etc.)
CHARGE UNIT DESCRIPTION:
INSTALLATION:
Place the solar panel outside in the sunlight.
Adjust the panel position at a 30 degree angle.
1. Battery charging status indicator
2. Load indicator
3. Battery charge level indicator
4. 12V outputs
5. USB 5V/1A outputs
6. Safety fuse (please remove it if you
don't use the product for long)
7. On/Off button
8. Solar panel input
9. Radio antenna
10. Display
11. SD card input
12. FM radio/MP3 player On/Off buton
13. Previous file / Vomule +
14. USB inputs
15. Speaker
16. Audio input
17. Mode selection button
(USB / card SD / AUX / FM )
18. Next file / Vomule -
19. Play / Pause button
2