FLAEM ProfiNeb Manual De Instrucciones página 18

TECHNICAL SPECIFICATIONS
Mod. P0915EM
Power source:
Max pressure:
Compressor air delivery:
Noise (at 1 m):
Operation:
Operating Conditions:
Temperature:
Air humidity:
Atmospheric pressure:
Storage conditions:
Temperature:
Air humidity:
Atmospheric pressure:
Dimensions:
Weight:
Power supply
Only use power supply mod. UME318-1215 (cod. 17111)
Primary:
Secondary:
APPLIED PARTS
Type BF applied parts are:
RF7 Dual Speed Plus ampoule
Minimum medication capacity:
Maximum medication capacity:
Operating pressure (with neb.):
(1)
Delivery:
(2) MMAD:
(2)
Breathable fraction < 5 μm (FPF):
(1) data recorded according to internal Flaem procedure I29-P07.5.
(2) In vitro testing performed by TÜV Rheinland Italia S.r.l. in collaboration with the University of Parma and in compliance with the EN 13544-
1: 2007 + A1 European Standard for aerosol therapy devices Standard. More details are available on request.
12V DC 1.25A
2 ± 0.3 bar
approx 9 l/min
approx 51 dB (A)
30 minutes ON - 30 minutes OFF
min 10°C; max 40°C
min 10%; max 95%
min 69KPa; max 106KPa
min -25°C; max 70°C
min 10%; max 95%
min 69KPa; max 106KPa
12(L) x 12(P) x 6(H) cm
0.58 Kg
100/240V~ 50/60Hz
12V DC 1.5 A
patient accessories (C2, C3, C4)
2 ml
8 ml
0.75 bar
Max
approx. 0.42 ml/min
2.44 μm
80.7 %
16
C1.4 speed selector
Min With valve
approx. 0.18 ml/min
2.95 μm
74.7 %