guil ECF20 Manual De Instrucciones página 8

GUIL – ref. ECF
2.- Assemble the rest of the steps.
Insert the legs and secure them with the bolts, washers and nuts provided.
3.- Fixing the step connectors on the highest step to the platform. To do this:
3.1.- Insert the metal plates into the platform rail and once in the required position, tighten
the nut to secure them in place.
4.- Join the legs of each step using the provided hardware, until all the steps are in place to form the
stair.
1 SCREW DIN912 M08x110
2 WASHER DIN125 M08
3 NUT DIN934 M10
4 WASHER DIN 127 M08
5 NUT DIN985 M08
7
1 SCREW DIN912 M08x55
2 WASHER DIN125 M08
3 WASHER DIN127 M08
4 NUT DIN985 M08
www.guil.es - GUIL -