Kasanova LAT000002NOC Manual De Instrucciones página 18

PRESSURE COOKER
18
PROBLEM
The pressure regulator/
steam release valve
does not release steam.
The steam goes out from
under the lid.
When cooking, steam
suddenly starts to esca-
pe from the safety valve.
The safety valve does
not raise. Pressure insi-
de the pressure cooker
does not increase.
The lid does not close
properly.
CAUSE
1. Not enough
water inside the cooker.
2. Insufficient level
of energy.
3. The pressure
regulator/steam release
valve is locked.
1.The lid is not properly
closed.
2. The silicone gasket is
not properly put on.
3. The silicone gasket is
worn out.
4. The silicone seal is
dirty.
1. The heat source is too
high/The pressure inside
the pressure cooker is too
high.
2. The pressure regulator/
steam release valve is
damaged or not clean.
1. The heat source
is insufficient.
2. There is not
enough water inside the
pressure cooker.
3. The safety valve
is not clean.
4. The silicone
gasket is not clean.
5. The lid is not
properly closed.
1. The lid was de-
formed.
SOLUTION
1. Refill the pressure
cooker with water.
2. Boost energy
levels.
3. Clean the pressu-
re regulator/steam release
valve.
1. Close the lid pro-
perly.
2. Put on the gasket
properly.
3. Replace the silico-
ne gasket.
4. Clean the silicone
gasket, the edge of the pres-
sure cooker and the lid.
1. Turn off the heat.
Remove the pressure cooker
from the hob to reduce the
pressure inside the pressure
cooker. After cooling, check
all safety devices.
1. Increase the heat
source.
2. Add more water.
3. Clean the safety
valve.
4. Clean the silicone
gasket, the edge of the pres-
sure cooker and the lid.
5. Close the lid pro-
perly.
1. Replace the lid