HJM BV426 Instrucciones De Uso página 20

Batidora Vaso BV426_Maquetación 1 14/07/16 13:41 Página 20
BEFORE CLEANING THE UNIT BE SURE TO
UNPLUG THE SOCKET FROM POWER SUPPLY
1. When cleaning the blender, use Pulse button for easy removal of
contents in blender.
2. To clean the blender jug, fill it with some warm water. Then press
the Pulse botton for a few seconds. Remove jug and then wash in
the water. After washing, please wipe the blender with damp cloth,
and then wipe it with dry cloth again.
3. Be sure the jug is empty before removing it from the motor (base)
4. Do not clean the motor unit in water; wipe the motor unit with damp
cloth.
5. Warning: pay attention when cleaning, blades are sharp
Ensure that the glass jug is completely empty before you unscrew
the retaining ring. Be careful when handling the cutting blade. All
removable parts are suitable for the dishwasher.
RECYCLING (Disposal of the product at the end of
its useful life)
The crossed-out wheeled bin is marked on all Electrical and
Electronic products, to remind the consumer of their obligation dispo-
se of them separately.
The consumer must contact the vendor to learn about the correct dis-
posal of his/her old electrical household appliance.
In case the discarded radiator contains oil, the regulations concer-
ning the disposal of oil must be followed.
According to European Directive 2012/19/UE, on
waste electrical and electronic equipment (WEEE),
old electrical household appliances cannot be dis-
posed of in the usual municipal containers; they
have to be collected separately to optimise the recy-
cling of the components and materials that compri-
se it, and reduce the impact on human health and
the environment.
- 20 -
E
N
G
L
I
S
H