ALLURIS FMI-220CS Instrucciones De Servicio página 21

1.3 PEAK-button to set the display to the actual measuement value, upper peak value of compressive and
tensile force, drag indicator function, and to recall minimum and maximum value of done measurements;
1.4 MODE-button for selecting desired measurement unit;
2 Display:
2.1 Battery indicator;
2.2 Indicator for measuring units and base functions;
2.3 „Peak" indicator;
2.6 4-digit main display, also displays functional settings.
3 Measuring axle for measuring attachments.
4 DC-Jack.
5 Mounting facility for test stand; at back of instrument, for details see graph in chapter 9.
6 Mounting facility for handles; only FMI-300 and FMI-400.
7 Outlet for data transmission, Hirose HR12-10RC-10SDL; not for FMI-100 and FMI-300.
8 Mounting facility for the hanger.
3.2. FMI-220 | FMI-230
Operation, display and plugs basically as described above, yet additionally with:
1.5 Mem-button for saving and recalling saved
values and activating storage, button 3.
2.5 Display for thresholds .
6 USB connector.
21