Safety instructions
Information on the refrigerant circuit
6
REFRIGERATOR/FREEZER COMBINATION MD 2867
Connect the unit to an easily accessible
domesticpower outlet 230V ~ 50Hz close
to the place where it is installed.
• Do not connect the unit to the mains supply if
your hands are wet.
• Do not wind up or kink the cable. To prevent the
risk of fire or overheating, do not use adapters,
extension cables or multisocket connectors.
• Electrical equipment must not be operated inside
the refrigerator.
• Do not use the unit if the connecting cable is
damaged. If this is the case, immediately pull out
the mains plug and have the cable repaired by an
electrician to prevent anyhazard.
The refrigerant circuit of the unit contains the
refrigerant R600a. (HCFC- and HFC-free).
If used in the commercial sector, the applicable
regulations must be observed.
The refrigerant circuit has been tested for leakages.
This product corresponds to the relevant safety
regulations for electrical equipment.