Innowater SMC Serie Manual Del Usuario página 25

MAIN MENU
2 Polarity per.
Press OK. The following screen will be displayed:
Polarity
Select period
Λ or V
Use the buttons to select the period and then press OK to confirm and save
the setting. Then press MENU once or more to return to the Production Screen. You
can also exit without saving the setting by pressing MENU.
Chang. polarity
remaining: 8 min
3. T V I readings
MAIN MENU
4 T V I readings
T= 29.8ºC
V= 23.40V I=3.4A
4. LCD contrast
MAIN MENU
6 LCD contrast
LCD contrast
- ■ ■ ■ ■ ■ ■ +
5. Fault messages
LOW WATER
LEVEL IN CELL
7h
When a polarity change is taking place the unit will
enter in pause mode during 10 minutes. This will be
indicated by the screen on the left showing the
remaining pause time.
This menu allows you to read find the temperature
inside the control unit, the voltage applied to the
cell and the current passing through it. These
parameters can be very useful when servicing or
diagnosing.
Go to the MENU 6 LCD contrast and press OK
Adjust the LCD contrast using the Λ V keys.
Press OK to save and exit.
25
E
N
G
L
I
S
H
SMC