Before First Use - Oster GCSTPX4060 Manual De Instrucciones

• When using the Iron for the first time, test it on a piece of old cloth to be sure that the
Soleplate and the Water Reservoir are clean.
• It is possible that the Iron will discharge some smoke or give off a slight odor during its
first usage. This is due to the initial heating of the materials used. This is completely
normal and will stop shortly afterwards.
• When not ironing, always have the Steam Select Switch turned to the closed
position .
USING THE STEAM IRON
1. Set the Steam Iron in an upright position and insert the plug into the wall electrical
outlet. The Power On Indicator Light will turn on.
2. Select the desired temperature on the Temperature Control Dial.
3. The Temperature Indicator Light will turn on once the selected temperature is reached
and you can begin to iron. The Temperature Indicator Light will turn on and off from
time to time while you are ironing since the thermostat automatically maintains the
Soleplate at the same temperature.
4. Another important feature of your Steam Iron is the 360º Swivel Cord, which prevents
tangling and allows for easy use by both right and left handed people.
CHOOSING THE RIGHT WATER
• This Steam Iron may be used with normal tap water. However, if the water of the region
in which you live is especially hard, it is recommended to use distilled water to prolong
the life of your Iron.
• Do not use water that has been desalinated with chemicals.

Before First Use

Instructions For Use
E n g li sh -4