Product Description; Taking Measurements - Trotec BA15 Manual De Instrucciones

Product description

1) Vane impeller
2) Precision thermister
3) LCD display
4) Power key
5) Hold key / Backlight switch
6) Max + min key
7) UNITS KEY
B - 3

Taking measurements

Press the Power-button (4) to turn the meter on or off.
Non Sleep Mode (BYPASS AUTO POWER OFF) APO
The meter will automatically turn off after 15 minutes
in the normal. When you turn on the meter, and press the
button UNITS fi rst,an "disAP0" appears on the LCD,then
you can release the UNITS key and the automatic power
off feature will be disabled.
Data Hold
Press the HOLD key to freeze the displayed reading.
Press again to unlock display.
Max/Min
Press the MAX/MIN key and the display switches from
max to min to normal. "RECORD" appears in the top
left-hand corner of the display. This refers solely to the
intermediate storage of the measured values in order to
determine the corresponding Max or MIN value.
Press and hold the MAX/MIN button for about 3 seconds
to clear and Stop the MAX/MIN/recording.
Measuring m/s, ft/min, m
Press the UINTS key and the reading will change from
m/s, ft/min, km/h, MPH, Knots,
Operating Manual – Flexible-Thermo-Anemometer
3
/min (CMM), km/h, MPH, knots
.
3
m /min (CMM)