Setup And Operation; Opening The Web Application Via The Hotspot - Porsche Home Energy Manager Manual De Instrucciones

Displays Description
DE
LED flashes green: Searching for
EN
PLC network connection.
FR
LED lights up green: PLC network
Status of connection in place.
IT
Powerline
LED flashes blue. Enabling DHCP.
ES Communication
LED lights up blue: DHCP (for PLC
(PLC) network
only) is active and PLC network
PT
connection is in place.
NL
LED lights up green: Network
connection in place.
SV
FI Ethernet status
On: LED lights up green during
DA
communication (currently not
NO
assigned).
RS485/CAN
EL
status
CZ
LED flashes or lights up yellow:
Fault present.
HU
LED lights up red: Functions
PL
Fault status restricted.
HR
Controls Description
SR
e To establish a WiFi
SK
connection using the WPS
function, briefly press the
SL
WPS button
WPS button (only network
ET
connection as client possible).
e To enable WiFi, press the WiFi
LT
button briefly.
LV
e To disable WiFi, press and
WiFi button
RO
hold the WiFi button for more
(hotspot)
than 1 second.
BG
MK
20
Controls Description
e To enable the PLC connection,
briefly press the PLC pairing
button.
e To enable the energy manager
PLC pairing
button
as DHCP server (for PLC
connections only), press and
hold the PLC pairing button
for more than 10 seconds.
e For a PLC connection to
a client, briefly press the PLC
pairing button again.
e To restart the device, press
the Reset button for less than
5 seconds.
e To reset the passwords, press
Reset button
and hold the Reset and CTRL
buttons for between 5 and
10 seconds.
e To reset the device to the
CTRL button
factory settings, press and hold
the Reset and CTRL buttons for
more than 10 seconds. This
overwrites all current settings.
USB connection
USB connection
f For information on network connection
possibilities, please refer to the Web Application
Manual of the Porsche Home energy manager.

Setup and Operation

The qualified electrician sets up the energy manager
via a web application.
The web application offers an extensive range of
configuration options. Obtain advice from the
qualified electrician performing the installation,
and make use of the web application's Help features.
f For information on the web application, see the
Manual at https://www.porsche.com/
international/aboutporsche/e-performance/
help-and-contact/
If you require a different language, please select
the appropriate website for your country.
Have the following information ready for setting up
the energy manager:
– Letter containing access data for logging into the
web application.
– Access data for your home network.
– Access data for the user profile (to link it with
your Porsche ID).
– Information on electricity tariffs/prices from the
contract with your electricity supplier.
Opening the web application via
the hotspot
You can open the web application on your device
(PC, tablet or smartphone) using a hotspot set up by
the energy manager.
e To open the web application when a hotspot is
active, enter the following IP address in the
address line of your browser: 192.168.9.11
Information
– You may have to enter the network key to open
the web application. This depends on your
device's operating system.
– Depending on which browser you are using,
the web application may not open immediately.
Instead, a notice regarding the browser's security
settings may be displayed first.