Electromagnetic Compatibility (Emc); Fcc/Ised Statement) - RIDGID RP 350 Manual De Usuario

RP 350/RP 351 Press Tools
Electromagnetic Compatibility
(EMC)
The term electromagnetic compatibility is taken to mean
the capability of the product to function smoothly in an
environment where electromagnetic radiation and elec-
trostatic discharges are present and without causing
electromagnet interference to other equipment.
These tools conform to all applicable EMC
NOTICE
standards. However, the possibility of them causing inter-
ference in other devices cannot be precluded. All EMC
related standards that have been tested are called out in
the tool's technical document.
FCC/ICES Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired oper-
ation.
Modifications not expressly approved by this company
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to cor-
rect the interference at his own expense.
This product complies with the Canadian ICES-003 Class
A specifications. See Declaration label on tool.
14
999-995-220.10_REV. B