4-Day Memory Sub Mode - Suunto OBSERVER TT Guía De Usuario

level pressure value will begin to flash.
4. Press the [ON OFF] button to scroll the value up or the [QUICK] button to scroll down.
5. When the current sea level pressure is displayed, press the [MODE] button to accept
the changes and exit.
Once you complete this process, the altitude measurement on the Observer should be
correct within a range of approximately ten meters or some tens of feet.
NOTE: Information on the current sea level pressure can be obtained through
newspapers, local news and radio weather reports, the local airport facility or through
the Internet under local weather.
NOTE: Setup mode will automatically be released if left idle for more than one minute.

4.2 4-DAY MEMORY SUB MODE

In the Barometric mode, PRESS the [SELECT] button once to enter this sub mode. This
feature allows you to follow changes in pressure that will assist you in forecasting
changes in weather condition (i.e. storms).
In the 4-day memory mode the display fields are as shown in Fig. 4.2:
a) The top field displays the day of the week;
b) The middle field displays the sea level pressure;
c) The bottom field displays the time corresponding to the pressure in the middle field
and the text "MEM"; and
d) The outer circumference of the LCD graphically displays the atmospheric pressure
where one full circle equals 100 hPa or 1 inHg.
To view the information compiled in the 4-day memory:
Press the [QUICK] button to scroll through the history of recordings beginning with
increments of one hour for the first six hours, after that increments are 6 hours.
Press the [ON OFF] button to scroll back up to the most recent recording.
30