Electrical Connection; Open And Close Commands - GIESSE VARIA SLIM RADIO Manual De Uso

feedthrough are arranged properly, it is recommended that the cable entry be
sealed with a drop of silicone; this will prevent humidity or water from entering.

9. Electrical connection

E
LECTRIC SHOCK HAZARD
Before beginning any work on the machine's wiring, make certain that the
electric power has been disconnected; failure to observe this rule may
compromise safety.
Cable entry to the terminal block
• No connection to the symbols indicated to the
side.
FUNCTION NOT PRESENT in this system
• Connection of the rain detection sensor. Two
different rain sensor models can be connected:
- Model SPR with five conductors:
▪ Red (+) connected to +15V,
▪ Black (-) connected to -15V,
▪ Blue
(N.O.
"
PIOGGIA
▪ Green (common) connected to -15V,
▪ Violet (N.C. contact) not used and should
be electrically isolated.
- Model SPR RADIO with two conductors:
▪ Red (+) connected to +15V,
▪ Black (-) connected to -15V,
• Connection of the manual control with 3
conductors [the common conductor on (
the conductor for opening on (IN 1) and the
conductor for closing on (IN 2)].

10. Open and close commands

10.1. Remote electronic control (Radio remote control)
The RC radio remote control is the standard-equipped device for controlling the
VARIA SLIM RADIO motor.
For more details on the characteristics and operation of the RC radio remote
control, consult the instructions manual provided with the radio remote control
itself.
.
contact)
",
connected to
),
COM
36