Installation Instructions; Parts List - Twin-Star International DFL001 Manual De Instrucciones Adjunto

PLEASE READ THIS MANUAL BEFORE INSTALLING AND OPERATING THIS APPLIANCE
IMPORTANT: Read all instructions and warnings carefully before starting installation.
Failure to follow these instructions may result in a possible electric shock, fire hazard.
and/or injury and will void the warranty.
Installation of Electric Log Set, should take 15 minutes. The only tool required is a Phillips
head screwdriver, not supplied with this unit.
Note: Do not use outdoors.
WARNING!!
1. This is an unvented electrical product with faux logs; do not attempt to burn the faux logs.
Do not attempt to burn wood or manufactured logs in or on this appliance or grate.
2. For indoor use only. Do not use outdoors or in other wet locations.
3. Do not attempt to alter plug. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
4. Dust regularly for cleaning. Do not use any abrasive type household cleaners as these
products will damage the decorative paint.
1. Line up the legs with the hole positions of the grate. Make sure to line up the edges correctly.
2. Fasten the bolts using a Philips Head screwdriver. Make sure not to over-tighten in order to
prevent damage to the product.
3. If the product is being used on a un-level surface, adhere the provided leveling pads onto
the feet in order to compensate accordingly.
4. Plug the power supply transformer to a standard 120V wall outlet, and into the DC port of
the product.
See directions in Figure 1.
ELECTRIC CRACKLING LOG
HOMEOWNERS OPERATING MANUAL
MODEL: DFL001
CONSUMER SAFETY INFORMATION

INSTALLATION INSTRUCTIONS

Figure 1

Parts List

1. Log and grate
2. Legs (4 pieces)
3. Bolts (4 pieces)
4. Leveling Pads (4 pieces)
1
5. DC Low Voltage Transformer
( Input: 120V AC , 60Hz ;
2
Output: 11V DC,150mA )
3
Electrical Specifications
4
Voltage: 11V DC
5
Watts: 1.5W
E-1