(2) Training zone Alarm Activation
(
,
or
• In Heart mode, press button B to enter
Target Zone mode (ZONE).
• Hold button C until
• Press button B to select the target zone
for the alarm:
alarm will only sound if your heart
rate exceeds the upper limit.
alarm will only sound if your heart
rate drops below the lower limit
alarm will sound both if your heart
rate exceeds the upper and drops below
the lower limit.
• Press button C to confirm.
(3) Training zone Selection
• Right after the Zone Alarm activation,
press button B to select Zone (1), (2),
(3) and (U).
• Press button C to confirm.
12. Viewing data from the heart rate monitor
a. Average heart rate
• The average heart rate is displayed on
the second row of the LCD.
• To reset average heart rate and timer,
press button B to enter exercise timer
mode (E.TMR) and then hold button C
until data is cleared.
V. 01 – 04/04/2012
)
flashes.
SHE17
14
©Velleman nv