Velleman SHE17 Manual Del Usuario página 7

6. Installing the batteries
a. Watch
For details, refer to Figure – Afbeelding – lllustration - Ilustracion -
Abbildung 1 on page 3.
• Remove the back cover of the watch with a screwdriver, install the
3.0V-battery with the positive (+) pole facing up and replace the
cover.
• Remove and reinsert the battery if the LCD displays irregular
figures. This will clear and restart the watch's microprocessor.
b. Belt
For details, refer to Figure – Afbeelding – lllustration - Ilustracion -
Abbildung 2 on page 3.
• Remove the battery cover from the bottom of the belt using a
small coin.
• Install the 3V battery with the positive (+) pole facing the battery
cover and replace the cover.
7. Wearing the devices
a. Watch
For details, refer to Figure – Afbeelding – lllustration - Ilustracion -
Abbildung 3 on page 4.
• You can wear the watch on your wrist or you can fix it on the
handlebar of your bike with the mounting system (included).
• Keep the computer and the transmitter within a maximum
operating distance of 60 cm.
b. Belt
For details, refer to Figure – Afbeelding – lllustration - Ilustracion -
Abbildung 4 on page 4.
• Adjust the elastic belt so that it fits tightly around your chest just
below the pectoral muscles.
V. 01 – 04/04/2012
SHE17
7 ©Velleman nv