Air Conditioner Use; Starting Your Air Conditioner Digital Control - Premium PWA1210G Manual De Usuario

Operating your air conditioner properly helps you to obtain the best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This prevents the air conditioner
from blowing a fuse or tripping a circuit breaker.
Do not try to operate your air conditioner in the cooling mode when outside temperature is below 65°F (18°C).
The inside evaporator coil will freeze up, and the air conditioner will operate properly.
NOTE: In the event of a power failure, your air conditioner will operate at the previous settings when the power is restored.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
The display always shows the room
temperature except when setting the
Set temperature or the Delay timer.
Power
Auto
High
Med
Low
Fan
Speed
Air Conditioner Controls
2

AIR CONDITIONER USE

Starting Your Air Conditioner—Digital Control
Light indicates the unit
is in the temperature or
delay time Set mode.
Set
Temp / Delay
Cool
Energy Saver
Fan Only
Delay
Mode
1-24hr
Light indicates the
delay timer is set.
Delay 1–24hr
Delay timer
Decrease
Mode select
Fan speed
Decrease
Temperature
set Increase
and Decrease
Remote Control
Delay timer Increase
Auto Fan on
Fan speed Increase
Unit power on/off