Installing The Car Seat - Foppapedretti MYDRIVE Instrucciones De Montaje

3. INSTALLING THE CAR SEAT

3.1 Installing the car seat in group 0+ (for children from 0 to 13 kg)
DO NOT USE THIS CAR SEAT ON A PASSENGER SEAT FITTED WITH A
FRONT AIRBAG.
The car seat can only be fixed on passenger seats equipped with a 3-point seat
belt (both diagonal and lap belt) with a deactivated airbag. The car seat, when in
group 0+, must always be rear-facing i.e. with the child facing backwards.
Step 1: Adjust the car seat in position 4.
Position the car seat facing backwards on
the seat, making sure that the front part rests
firmly against the backrest of passenger seat.
Insert the seat belt into red/blue
Step 3:
locking device and over the blue loop,
placed on the same side (see point 2.8).
Insert the lap belt into the belt loop
(group 0+).
• ENGLISH •
INSTALLING THE CAR SEAT
Step 2:
(diagonal and lap belt) and insert it through
the belt loop in the backrest, then clip in the
seat belt buckle. A "click" will indicate that it
is attached correctly.
28
Pull out the vehicle's seat belt