Publicidad
POWERTEX Aluminum Wire Rope Pulling Hoist PAPH-S1 0,8 - 5,4 ton
Instruction for use (GB) (Original instructions)
Read through these user instructions before using the wire rope hoist. Improper operation may lead to hazardous situations.
General safety provisions
•
Only to be used by trained operator.
•
Do not use in explosive or corrosive environment.
•
Temperature range: -10°C up to +50°C. Using the wire rope hoist in icy conditions, make sure that neither the wire rope or machinery is frozen.
•
Check the function of the wire rope hoist before use.
•
Do not exceed the maximum load.
•
Handle the wire rope hoist with care. Do not throw the hoist about or let it fall to the ground.
•
Do not use the wire rope hoist for welding work where it is exposed to welding spatter or current.
Don't use with food, cosmetics or pharmaceutical products, and must not be subjected to severe corrosive influences (e.g. acids).
•
Don't use any surface finishing that could have an impact on the material. Don't expose the hoist to heat, welding or drilling.
•
Keep the wire hoist clean, dry and protected from corrosion.
•
The wire rope hoist must not be used for lifting persons.
Data
Art No
16.25PAPHS10080
PAPH-S1/800
16.25PAPHS10160
PAPH-S1/1600
16.25PAPHS10320
PAPH-S1/3200
16.25PAPHS10540
PAPH-S1/5400
*
Wire rope movement with one back and forth movement
Dimensions
WLL ton
A
(mm)
0,8
426
1,6
545
3,2
660
5,4
930
0,8 t
Model
WLL
Hand force max.
(ton)
0,8
1,6
3,2
5,4
B
(mm)
(mm)
235
284
325
390
Movement*
(N)
(mm)
341
>52
400
>55
438
>28
850
>22
C
D
(mm)
168
60
190
72
230
91
300
110
2
1,6/3,2/5,4 t
Wire rope dia.
Lever length
(mm)
(mm)
8,3
800
11,0
1200
16,0
1200
20,0
1120
E
L1
(mm)
(mm)
64
-
97
692
116
692
150
692
Weight
(kg)
6,4
12
23
58
L2
(mm)
800
1200
1200
1200
Publicidad
