Advance ecoflex SC2000 Instrucciones De Uso página 23

(**) As described in the Use chapter, set the machine and the on-board battery charger on the basis of the type of battery to be
installed by modifying the BAT parameter from the table below:
Installed battery type
WET
GEL / AGM
GEL EXIDE
GEL OPTIMA
GEL DISCOVER
GEL FULLRIVER
Alarms log screen (G, Fig. 8)
This function allows you to check for any stored alarms on the
machine.
Use this function only with support from a Advance Service
Centre to solve any operating problems.
To return to the main screen (E, Fig. 7), press push-button (A)
repeatedly.
Operating Time Counter Screen (H, Fig. 9)
This function allows you to check the total accumulated hours of
work for each machine subsystem:
– TOTAL counter (machine running time)
– DRIVE counter (drive system usage time)
– BRUSH counter (brush rotation system usage time)
– VACUUM counter (vacuum system usage time)
To return to the main screen (E, Fig. 7), press push-button (A).
01/2015
INSTRUCTIONS FOR USE
Wet cell batteries
Generic GEL or AGM batteries
GEL batteries or EXIDE /SONNENSHINE brand
®
GEL batteries or OPTIMA™ brand
GEL batteries or DISCOVER brand
®
GEL batteries or FULLRIVER
®
brand
G
Figure 8
H
Figure 9
9100000386 - SC2000
ENGLISH
Value
0
1
2
3
4
5
A
P100870
A
P100871
21