Storage And Maintenance - Nosiboo pro Manual Del Usuario

7. Storage and maintenance

Storage
1. Unplug the device after it has completely shut off and the
cooling phase is over.
NOTE: After the cooling process has stopped, the power cord
should be unplugged from the electrical outlet and from
the device.
2. Disconnect the connecting tube from the device and the
Colibri head.
3. Keep the device in an enclosed space where it is protected
from dust and damage (e.g. in a cabinet).
NOTE: Do not store near a heat source.
Maintenance
There is a special air mesh behind the tube connector which
prevents solid objects and dust from entering the housing. In the
event of an unexpected drop in performance, it is recommended
that you check the air mesh before the end of the cycle. If the air
mesh is dirty or clogged, replace it with a spare air mesh. (A list of
spare parts can be found in the "Accessories, spare parts" section.)
User manual
*
DMR-01/A05/V03 2019-10-01
*
Protect the power cord against damage.
Keep the power cord away from heat.
Don't leave the parts of the dismounted Colibri
head within the reach of children.
Don't break the power cord, and do not place
heavy items on it, because a damaged cord
may cause electric shock.
Make sure that all parts are dried thoroughly
before assembly.
Store the device in a clean, dry place. Avoid
direct sunlight or heat.
Nosiboo Pro Nasal Aspirator
*
Page: 15/60
*
ENU