Johansson Profino 6610 Manual De Usuario página 6

Repeat this section to set all parameters
> Turn the button to select the desired mode.
> Push the rotary button to enter the selected mode.
> Inside the mode, turn the button to select the parameter (input, cluster, channels, level ...)
> Push the rotary button to confirm the parameter setting.
Exit programming mode
> Turn the button to select
> Push the button more than 3 seconds to confirm.
3 s.
> Turn the button to select
> Push the button to confirm.
Note:
The amplifier will go in "stand-by" and will display a dot after 1 minute if the rotary / push button is not activated.
Exit mode.
The LED is red and 2 dashes are displayed
6
Mode is indicated with
a GREEN colored LED
The LED is now RED
Input and Cluster LED's
Display
LED returns to a GREEN color.
The LED is green
Exit
Exit
or
Free access
to programming programming mode
mode with security code "50"
A dot is displayed
GREEN LED
RED LED
Access to