Johansson Profino 6610 Manual De Usuario página 8

Setting channels / cluster
Each UHF cluster has a bandwidth which can be programmed from 1 to 7 channels.
The VHF cluster has a bandwidth of 1 or 4 channels.
To set the channel(s) per cluster:
In the following example cluster 1 is set for channel 22 to channel 26.
• Turn the button to select the
> Push the rotary button to enter the selected mode.
> Inside the mode, turn the button to select the cluster to be set.
> Push the button to confirm.
• Turn the button to select the
> Push the rotary button to enter the selected mode.
> Inside the mode, turn the button to select the start channel.
> Push the button to confirm.
• Turn the button to select the
> Push the rotary button to enter the selected mode.
> Inside the mode, turn the button to select the stop channel.
> Push the button to confirm.
Repeat this section to set all clusters
Filter-Input mode.
Start mode.
Stop mode.
8
Filter Input
The LED is green
Filter Input
The LED is now red
LED n°1
Filter Input
The LED is green
Start
The LED is green
Start
The LED is now red
Display
Start
The LED is green
Stop
The LED is green
Stop
The LED is now red
Display
Stop
The LED is green.