Carat Dustcatch Pro Manual De Instrucciones página 10

Dustcatch Pro
WARNING
・DO NOT use the Dustcatch Pro with the angle grinder which can NOT be fitted correctly instructed by this manual.
・Dustcatch Pro is only for cutting concrete, block, and tile. DO NOT use for cutting steel or other materials.
・Dustcatch Pro must be used with the Vacuum suitable for the concrete dust.
・Dustcatch Pro is only for Diamond cutting blades. DO NOT use with abrasive wheels or tipped saw blades.
・Always check the Dustcatch Pro for damage, cracks, or deformation before use.
・DO NOT use the Dustcatch Pro if it is cracked, damaged or bent as this could lead to injury.
・Be sure to wear the protective goggles, dust mask, protective foot wear, earplugs and other protective equipment when working.
・Keep Dustcatch Pro away from gasoline, solvents, and paraffin.
・Ensure the cutting material securely clamped before cutting.
Explanation
of the pictograms.
SPECIFICATIONS
Model Code DPZ230NK00
Suitable Blade 180-230mm / T2-3mm Diamond Blades.
Cut Depth 5-60mm (230mm Blade)
Weight 2.2kg (Main Unit with adaptor system)
Cut material Concrete, Block, Tile, ...etc.
Suitable BOSCH
Angle Grinders
MAKITA
HITACHI
Milwaukee
DEWALT
Metabo
FLEX
OVER VIEW
Fig.1
PREPARATION
1. [Metabo grinder ONLY]
Remove the Lever unit and O-ring
(WX22-230 and W24-230 only) ,
then set [b] Metabo Ring on the
Gear Case.
(Fig.2)
2. Set [c] Adaptor around the Gear
Case with the Hooks securely
stored into the groove at Gear Case.
(Fig.3)
-10-
180 / 230mm Diamond Blade Dust Extractor
Instruction Manual
General Read the operating
Warning. instructions before use.
GWS20-230H, GWS22-230H, GWS22-230JH, GWS22-230LV, GWS24-230H, GWS24-230JH, GWS24-230BV, GWS24-230LVI,
GWS24-230JVX, GWS26-230JH, GWS26-230JBV, GWS26-230LVI
GA9020 / 9030 / 9040 series.
G23MRU, G23UBY, G23SEY, G23SCY, G23SC3, G23SR, G23SRU, G23SW2, G23SWU, G23UC, G23UCY, G23UDY
AG22-230, AG22-230E
DWE494, DWE490, DWE492, D-28490, D-28492, D-28498
WE24-230MVT, W22-230MVT, WE22-230MVT, W24-230MVT, W26-230MVT, WE26-230MVT, WX22-230, W24-230
L21-6 230, L24-6 230, L26-6 230
[a] Main Unit / [b] Metabo Ring / [c] Adaptor / [d] Centering Holder / [e] Flange Bolt / [f] Base Flange
[g] Spacer T3.4 / [h] Spacer I.T4.5 / [ i ] Spacer T6.0 / [k] Spacer T9.4 / [m] Spacer T10.6
[n] Bolt (L60) / [o] Bolt (L45) / [p] Hex Wrench / [q] Swing Duct / [r] Vacuum Joint
[a]
Metabo
Only
[b]
Gear Case
Fig.2
Wear
eye protection. breathing protection.
[d]
[c]
[b]
Lever unit &
O-ring
WX22-230
W24-230
only.
English
Wear Wear
ear protection.
[e]
[m]
[p]
[k]
[ i ]
[n] [o]
[h]
[g]
[q]
[ f ]
[c]
Hook
Gear Case
Fig.3
N300227
Wear
protective gloves.
[r]
Groove