Operation And Use - Vortice VORT HR 350 AVEL Manual De Instrucciones

Ocultar thumbs Ver también para VORT HR 350 AVEL:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 97
ENGLISH

Operation and use

User interface
The following operations can be performed through the user interface:
• Temperature control;
• Air speed adjustment;
• Weekly air speed programming (only NOT UK Markets);
• Alarms management.
The below table shows functions related to each key on the interface.
I
Function 1 recall key.
II
Function 2 recall key.
X
Key to exit from the displayed page.
Key to: increase speed / move to the upper
row or value.
Key to: decrease speed / move to the lower
row or value.
Confirmation (OK).
Key and display backlighting remains active for about two minutes after the last key is pressed.
When backlighting is off, you can switch it back on again without activating any function by pressing any key. This means
that, to turn the display back on, press any key and then press the desired key again
"HOME" page
Upon start-up, the display shows the manufacturer's logo for about 10 seconds, then it goes to the "HOME" page.
This page allows you to view various data useful for controlling equipment.
The data and information that the page can display are indicated in the figure and table below.
30
I
Display
II
X
The following picture shows display areas:
1
3
4
6 6 6
2
5
7

Publicidad

Tabla de contenido
loading

Tabla de contenido