Archos Smart Home Guía De Usuario página 17

PAIRING
Once you have created rooms, the next step allows you to pair accessories with your tablet.
To pair an accessory
1 Check if Bluetooth is turned ON in the tablet. If not, restart it from Settings > Wireless &
Networks.
2 Select the desired accessory.
Make sure you have removed the insulation label "remove before use" in the batteries.
3 Press the pairing button of the accessory for 5 seconds.
The pairing indicator starts blinking.
4 Press the Start button on the tablet.
The pairing process begins.
If the pairing succeeds, the following message is displayed: Successfully
paired! Press OK to continue
5 Select OK.
You are offered to link the device with an existing room.
UserGuide_ARCHOS_Smart_Home_Tablet_book.indd 17
EN
17
15/05/2014 16:05:34