• Amplifier with different number of inputs and bands are available: to cope
with the number and type of antenna. Products with 4 or 5 inputs are
available in the range.
All these products allow the correct amplifier selection for every
installation.
On every product there is:
• Remote power available total of 50 mA/12Vdc available for supplying
mast head amplifiers, switchable on each input
• Protection against short circuit and overload with automatic restart
• 20 dB attenuator on every input
• The possibility to expand the frequency range of the Band 1 input (when
this input is available) to the FM by an internal switch.
• Test point at – 0dB
• Power LED indicator
• Detachable mains cable
• Earth bonding screw
• Label inside the amplifier with a schematic description and the main
specifications
Optional accessory:
Plastic spacers (ref. MBX0001) are available in order to increase the
distance between the wall and the device by 19 mm and to permit to pass
easily cables behind the amplifier.
The position of every input and output are detailed on the cover label.
CONNECTIONS
4