Monitor Setting - miniland baby digimonitor 3.5 touch Manual De Instrucciones

Sound sensitivity
Some babies are noisier than others! You can customize the sensitivity of your baby
monitor to suit your baby. Set "high" sensitivity for a baby that sleeps peacefully and cries
quietly and "low" sensitivity if the baby tends to make noise while sleeping or makes fairly
loud noises before actually crying, or set it to a "medium" level if you consider that your
baby's behaviour does not fit either of the two previous patterns.
Click on the icon (b) in the main menu (t) and select the desired camera. You can then
enable or disable the feature and choose the sensitivity level of the camera; i.e. the sound
threshold above which the camera will start transmitting.
You can also control this feature from the main screen (o). Click on the icon (b) and this will
appear with the sensitivity level (LO, ME, HI) or with a red cross to disable the VOX feature.
Changes made directly on the home screen (o) only affect the camera that is picking up the
images shown.
5.2.6.7. VOLUME/DISPLAY
With this menu you can set the main features of the screen: contrast, brightness and
volume.
To access, click on the icon (r) in the main menu (t) and the icons for each of these features
will appear. You can select one of 10 levels for each one (0-9) by pressing the + or – signs
as required.
5.2.6.8. SETTING
With this menu you can access and set many of the features of the baby monitor. To
access it, click on the icon (s) in the main menu (t).
In this menu there are several distinct submenus, the monitor settings and the settings of
each of the cameras linked to the monitor.

5.2.6.8.1. MONITOR SETTING

To choose this option, click on the icon .
Pair
This product is designed to allow observation of different areas with up to 4 cameras
(channel 1, 2, 3 or 4 assigned to different cameras). The monitor and the original camera
leave the factory programmed with channel 1. If you need to add an extra camera, follow
the following process.
After entering the Pair submenu, select the channel in which you want to link the new
camera by clicking the relevant icon. The icon will then change and the ON/link LED (2)
of the monitor will flash green. Press the link button (V) of the camera and, if the process
has been carried out successfully, the icon will appear in place of the previous one and
the LED indicators will light up green. If linking is not successful, the icon will appear. In
this case, try again with the same channel or with another channel if necessary.
For various reasons, connection may be lost between the monitor and a camera already
linked. In this case, repeat the process explained above to relink the camera to the monitor.
· Date/Time
Access to this submenu allows you to set the date and time appearing on the baby monitor.