Audiolab LIVE 24 XL Manual De Usuario página 10

14. FX Edit Press this button can show and editor
the setting of internal effects. Each of the FX
owns 12 program effects. The window is as
below. For the detail operation, please refer
to introduction of DSP Control section.
15. Copy Press this button and select a chan-
nel to copy the setting parameters of this
channel to other channels. For the detail
operation, please refer to introduction of DSP
Control section.
16. Routing & Sends on Faders AUX1-8/FX1-2
Press this button, users can select one or
several channels to assign the signal to corre-
sponding outputs. Routing: Press this button
to enter the assign page, select the channel
to be assigned (AUX1-8, FX1-2 and Main) and
click Enter to confirm. Sends on Faders AUX1-
P. 10
AUDIOLAB Live 24 XL -
English version
Gate
PEQ
Comp
Channel
8/FX1-2: The function is the same as the
Routing button. Press this button and it will
flash, then select the channel to be assigned.
For the detail operation, please refer to intro-
duction of DSP Control section.
17. System Press this button to go to System
page, as well as show and edit parameters of
the system, as below picture show. For the
detail operation, please refer to introduction
of DSP Control section.