Audiolab LIVE 24 XL Manual De Usuario página 20

Long Faders interface
Touch this icon to switch
channels and enter cor-
responding Long Faders
page, in which you can adjust channels'
basic function like pan, solo, mute, level
and rename the channel, etc.
Functions on this icon (like mute, level
number, pan, long fader, solo and chan-
nel name) are the same with that in
Mixer interface.
Assign interface
The 24 main inputs and internal FX returns can be
assigned to any or all of the outputs, Aux sends
and main outputs. Aux 1-4 and AUX5-8 can switch
to each other by touching a switch icon in this
page. First, let's see the Aux1-4 mode as below
picture show.
P. 20
AUDIOLAB Live 24 XL -
English version
Touch Main, AUX1-4 or AUX5-8 on the LCD
screen or corresponding button on the panel
to assign input channel audio to these channels
or buses. They will illuminate synchronizing
with buttons in Assign area on the panel after
pressed. To adjust output level of the channel
audio, you can rotate Parameter Adjust knob or
corresponding Main, AUX1-4 or AUX5-8 knobs on
the panel.
Touch AUX1-4 and FX1-2 on the LCD screen or
press corresponding button on the panel to
assign input channel audio to these channels
or buses. To adjust output level of the channel
audio, you can rotate Parameter Adjust knob
on the panel. Touch PRE on the screen, it will
switch to POST, the AUX & FX send will derive
its signals from all channels post-fader. If the
icon has not been pressed and not illuminate, by
default, the AUX & FX Send will derive its signal
from all channels pre-fader and all unaffected by
the sending channel's fader position. In a word,
touch PRE and switch it to POST, then you can
adjust its level by sliding fader. Otherwise, the
fader wouldn't function on level adjustment.
Slide the fader to change selected input
channel audio. The fader function is the
same with Fader on the panel, which
can control input signal's level, they will
change synchronously. Meter beside it
indicates the signal level activity. Pan
above fader indicates value of pan set-
ting. Solo can monitor selected channel
audio. Mute can silence selected channel
audio. Long press the name box can
rename the selected channel.