ratiotec X 400 Manual De Instrucciones página 5

5. AUTOSTART: ______
You can activate | deactivate the device's automatic counting start by holding down
the 6 button.
6. SPEED: __________ Speed setting by pressing the 7 button for three seconds.
Setting the speed mode with the touch function: 1. 800 | 2. 1000 banknotes per
minute.
7. PRINT: ___________ Print the result of the count by pressing the 8 button for three seconds, after which a
brief alarm will sound.
8. S/N: ____________ Print out the serial number by pressing the 9 button for three seconds, after which a
brief alarm will sound.
Press the 4 button, to switch ON | OFF the serial number identification function. The
serial number recognition is in all orientations possible.
9. BAT: ____________ The batch function allows you to count an exact number of banknotes as a bundle,
e.g. 10 notes from a larger stack of banknotes. The batch counting of the banknotes
can be set independently of the counting mode. The device stops the counting proce-
dure automatically, as soon as the preset batch has been reached.
10. TOP ARROW: ___ Long press of button: Report function for the suspected banknotes (Report RJ).
11. BOTTOM ARROW: _ Long press of button: Report function for all counted banknotes (Report RC).
12. TIME SETTING: ___ Press the CURR button for three seconds in order to call up the user menu and to set
the time.
[ EN]
5