Grandstream GVC3210 Guía De Instalación Rápida página 8

CONFIGURING GVC3210 VIA WEB UI:
1. Ensure your GVC3210 is properly powered up and connected to the
Internet.
2. The IP address of the GVC3210 will show on the top status bar of the
connected display device (e.g., TV) via HDMI.
3. Type the IP address in your PC's browser (see figure below).
4. The default username and password for administrator are "admin" and
"admin". The default username and password for user are "user" and
"123".
5. In the web GUI, select Settings → Account → General Settings page
to configure Account name, SIP Server, SIP User ID, Authenticate ID and
Authenticate Password to register the account on the GVC3210.
6. The network settings can be configured under web UI→ Settings →
Network Settings page; EPTZ Adjustment and Preset Settings can be ac-
cessed under web UI → Device Control → Video Control page.
7. Please contact your ITSP (Internet Telephony Service Provider) for ad-
ditional settings that may be necessary to configure the GVC3210.
For the detailed user manual, please download from:
http://www.grandstream.com/support
~ 11 ~
ZH
GVC3210不预设对医院，执法机构，医疗中心(急救服
务)以及各种紧急服务的紧急通话服务。用户必须自行
设定紧急通话功能。用户必须自行购买SIP兼容的网络
电话服务，正确的设定GVC3210使用该服务，并定期
测试您的配置以确保GVC3210如预期工作，否则请购
买传统无线或有线电话服务来拨打紧急通话。
Grandstream Networks 公司的GVC3210不支持紧急
通话服务。Grandstream
和员工以及其相关机构对此所造成的任何索赔、损失
或者损害都不负有任何法律追究责任。在此，您将无
权对任何以及所有由于无法通过GVC3210拨打紧急电
话以及没有遵照前段文字描述而造成紧急通话失败的
事件提出诉讼。
Networks公司、其管理者
~ 12 ~