AEG A82900GNW1 Manual De Instrucciones página 17

2
1
2
1
3
4
1
2
• Disconnect the cable (1) which comes
from the door.
• Unscrew the cable holder (2).
• Change the position of the cable in
the cable holder.
• Unscrew (1) and remove the lower
hinge (2) from the cable.
• Unscrew the hinge pin plate (3) and
move it from the right to the left side
(4) before reinstalling on the hinge.
• Unscrew and move the pedal to the
opposite side.
• Use a small screw driver to remove the
adapter from the door on the oppo-
site side and pull out the cable (1).
• Remove the adapter (2) from the cable
and move it to the cable on the oppo-
site side. Push the cable into the door.
ENGLISH
17