Assembly And Adjustment - Ottobock 4R101 Instrucciones De Uso

tions may be moved independently in two planes via a cross support. The
Sliding Adapter is installed between 5R1 Socket Attachment Block or 5R6
Thermoplastic Adapter and any socket adapter (fig. 1). The socket material
between the shells of the 5R6 does not affect adjustability when using the
4R101 Modular Adapter.
The 4R101's low structural height facilitates its use for relatively long re-
sidual limbs. A 4R37/4R51 Rotatable Socket Adapter may be used to add
rotation adjustments.
Atention!
Please avoid exposing prosthetic components to corrosive elements
such as fresh water, salt water, acids and other liquids. Using this
medical device under such conditions will render all claims against
Otto Bock HealthCare null and void.
Please also inform your patients!
3 Technical Data
Article number
Weight
System height
Material
Max. patient weight
Displacement / m – l and a – p directions
Mobility level
4 Handling

4.1 Assembly and Adjustment

Use the 501S41=M6×25 Countersunk Head Screws supplied with the adapter
for its connection to the socket attachment block. The 501S41=M6×16
Countersunk Head Screws are intended for the attachment of a socket
adapter to the lower section of the adapter.
4R101
205 g
25 mm
Aluminum
100 kg
± 11 mm
–
Ottobock | 7