Joerns Healthcare Oxford Ascend Manual De Instrucciones página 7

E n g l i s h
4.
Turn the locking knob until hand tight.
5.
Line the handle assembly up to the mast, and attach using the fixings provided. The fixings
and wrench needed to attached the handle are kept in the user instruction wallet for safe keeping.
6.
Fit power pack to the lift and make sure the latch holding the pack in place is fully engaged.
"Click" in place.
DISASSEMBLY
The lift should not be disassembled unless for service, repair or transport if necessary. Therefore
follow the assembly instructions in reverse sequence.
Oxford ®
Ascend
7
294000.10022 Rev. C