Bresser MyTime Duo Instrucciones De Uso página 12

Despertador digital con indicador de temperatura y humedad
Ocultar thumbs Ver también para MyTime Duo:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
Slide SET button (8) into AL SET mode when the respective
alarm mode is in display. Then the alarm mode will blink,
press HOUR/MONTH button (5) to reach the desired hour,
press MIN/DATE button (6) reach the desired minute.
Note:
How to switch between Alarm1 and Alarm2:
Slide SET button (8) into AL SET mode, press 12/24 YEAR
button (4) to switch between single
mode. After done, slide SET button into LOCK mode to
finish the alarm setting.
12/24 YEAR button (4)
Set 12 or 24 hours system:
Slide the SET button (8) into LOCK mode.
Press to switch between 12hr or 24hr system. When 'AM'
appears, it means 12hr. Press 12/24 YEAR button again,
'AM' will disappear, it means 24hr system.
12
Set year mode:
Slide SET button into DATE SET mode, the date setting
mode will blink. Press 12/24 YEAR button to reach the
desired year.
HOuR/mONTH button (5)
Set hour:
Slide SET button (8) into TIME SET mode, the time mode
or dual alarm
will blink. Press HOUR/MONTH button to reach the de-
sired hour.
Set month:
Slide SET button into DATE SET mode, the month mode
will blink. Press HOUR/MONTH button to reach the de-
sired hour.
mIN/DATE button (6)
Set minute:
Slide SET button (8) into TIME SET mode, the time mode

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

80-1001080-10011

Tabla de contenido