Premier TSP-4912USDB Manual De Instrucciones página 16

Operation
Using The AUX Input: Power off and lower the volume. Connect the output from the AUX source
(CD, DVD, Mixer, Mp3 player) to the AUX input on the rear of the sub-woofer base unit. Connect
the satellite speakers to the speaker outputs on the rear of the sub-woofer base unit. Power on
the and the AUX signal sources. Set the Input key to AUX. Slowly raise the volume to the desired
levels.
Using the USB/SD card Input: Power on and lower the volume. Put the USB flash drive or SD
card to the respective input. The system will automatically play the .mp3 files from the USB flash
drive or SD Card. To change the input press the input button until the unit is set to USB/SD.Slowly
raise the volume to the desired levels.
Using the Bluetooth Input: Power on and lower the volume. Press Input button to setthe unit to the
Bluetooth input. The LED indicator should be flashing Blue. Open the Bluetooth enabled device's
Bluetooth connections and search for Bluetooth enabled devices. The Bluetooth device should be
able to locate a device named "PREMIER". Select this device and connect to it. In order to
connect to the device enter the password which is "0000". Once successfully paired you will be
able to play audio directly on the speaker from your Bluetooth enabled device. When the input is
switched to AUX or USB/SD and then back to Bluetooth there is no need to pair the enter the
password in order to connect a Bluetooth enabled device that was previously paired with the
PREMIER.
P-7