Electrical Connections - GIESSE VARIA SLIM Serie Manual De Uso

G. Mount the bracket for outward opening windows onto the moveable part of the frame in accordance with the markings indicated on the template.
H. Complete assembly of the chain terminal with the rapid release hook inserted onto the provided pin Ø4x32 in median position (Fig. 11).
I. Mount the actuator onto the brackets by inserting the two openings at each side onto the corresponding pins on the brackets.
J. Rotate the actuator 90°, bring the chain terminal up to the bracket and insert the pin into the opening on the bracket. Insert the rapid release hook
into the bracket.
K. Check that the exit on the chain is perfectly aligned with the bracket. If the chain is not aligned with the bracket, loosen the fixing screws and
reposition the bracket correctly.
L. Check all electrical connections with the diagram on the label attached to the lead.
M. Carry out a complete check of opening and closure of the window. Once the closure phase has been completed, check that the window frame is
completely closed by checking the pressure on the weather strips.
N. On re-entry the actuator limit switch functions automatically. The device exerts a traction force of over 300 N to guarantee perfect sealing up of
the weather strips.
9.4. Vertical assembly of the actuator on outward opening window
Vertical application on
outward opening
Above the drawing of specific application using accessories provided. For different mountings, please contact manufacturer.
A. Pencil in an "X" over the centre line of the window frame (Fig. 12) or fairly divide it in case of use of more VARIA SLIM Syncro.
B. Select the correct form of brackets (Fig. 13).
C. Fold the template along the green dotted line and keep in position at 90°. Attach one part to the window frame (fixed part), taking care to line up the
axis with the "X" previously pencilled in on the central line and line the folded part up against the moveable part of the frame. Warning: as various
different applications are possible, place the actuator in a central position and adjust the positions of the brackets, taking care to keep the actuator
aligned with the window section.
D. Bore holes into the window frame at the points indicated (Fig. 14).
E. Mount the bracket for outward opening windows onto the moveable part of the frame in accordance with the markings indicated on the template.
F. Complete assembly of the chain terminal with the rapid release hook inserted onto the provided pin Ø4x32 in median position (Fig. 15).
G. Mount the two brackets on to the sides of the actuator.
H. Position the actuator onto the window frame and line up with the holes bored earlier. Fix the actuator in position with the screws provided.
I. Bring the chain terminal up to the bracket and insert the pin into the hole on the bracket. Attach the rapid release hook to the bracket.
J. Check that the exit of the chain is perfectly aligned with the bracket. If the chain is not aligned, loosen the fixing screws and reposition the bracket
correctly.
K. Check all electrical connections with the diagram on the label attached to the lead.
L. Carry out a complete check of opening and closure of the window. Once the closure phase has been completed, check that the window frame is
completely closed by checking the pressure on the weather strips.
M. On re-entry the actuator limit switch functions automatically. The device exerts a traction force of over 300 N to guarantee perfect sealing up of the
weather strips.

10. ELECTRICAL CONNECTIONS

10.1. Connections of Varia Slim
The actuator comes with a 2 m long circa (±5%) lead which has been calculated in accordance with safety rules. In the event that the distance
between the actuator and the control button should exceed this length, the cable should be extended. See table (section 8.1) for conductor section
indications. For harness, please follow the following diagrams.
IMPORTANT. in 24V actuators, wire Green "3" in not used must be insulated.
After connecting the electricity supply to the control button (bipolar with arrows if possible), check that the up key function opens the window frame
and the and down key function closes it. In the event that keys should function to the contrary, invert cable positions.
10.2. Connections of VARIA SLIM Syncro
Cable supplied together with actuator is 2,5 m (±5%) long and it is calculated in accordance with safety rules. See table (section 8.1) for conductor
section indications.
Figure 12
1 2
3
F N
1 2 3
230V
Figure 13
1
2
+
1 2 3
21
Figure 14
3
24V
Figure 15