Technical Information About Function; Technical Data; Id Plate And Marking Data - GIESSE RACK MAX 450 Manual De Uso E Instalación

3.

Technical information about function

The rack actuator performs opening and closing movements for the window using a
round section steel rack. Movement is powered by electricity that feeds a reduction
motor controlled by an electronic board.
The opening stroke for the window CANNOT be programmed as it is regulated by the
length of the rod on the reduction motor. The electronic control device allows the rack to
protrude until it encounters an obstacle that blocks its stroke. This could be provided by
the internal lock on the rack or complete closing/opening of the window.
In both outwards and return directions the stroke-end uses a self-defining electronic
process with power absorption, and for this reason, no adjustment is required.
4.

Technical data

Model
Thrust and traction force (F
Course lengths (S
Input voltage (U
N
Current absorption at nominal load (I
Power absorption at nominal load (P
Travel speed without load
Length of run without load
Electrical insulation
Type of service (D
Max. and min. temperatures for function
Degree of protection for electrical devices
Adjustment of socket at casing
Connection in parallel of two or more motors
Connection in tandem or in series
Holding nominal force (it can vary according
to the chosen brackets)
Limit switch stop at opening and closure
Protection against overload at opening and
closure
Feeding cable length
Dimensions
Weight
Information presented in these illustrations is not binding and is also subject to variation without prior notice.
(*) Technical personnel can shorten track runs by adjusting the internal limit switches.

5. Id plate and marking data

The RACK MAX 450 actuators have UE marking and comply with the Standards listed
in the Declaration of Conformity. They also come with a Declaration of Incorporation,
due to their classification by the Machinery Directive as "partly completed machines".
Both declarations are included in the final pages of this manual.
)
N
)
V
)
)
R
180, 230, 350, 550, 750, 1000 mm (*)
)
N
)
N
In accordance with length of truck run
103x47x(Course length+135) mm
Varies according to construction
27
RACK MAX 450
450 N
110-230V~ 50/60 Hz
0,28 A - 0,19 A
21,6 – 24 W
6,7 mm/s
Class II
2 cycles
-5 +65 ºC
IP44
Position self regulating
Yes
Yes
2200 N
At absorption of power
At absorption of power
1 m