INSTRUCTIONS AND WARNINGS FOR USE AND OPERATION
Important
Besides being authorised and appropriately
documented,and if necessary,instructed and
trained, users,on fi rst usage, have to simulate
several operations to identify the controls
and main functions.
Use only as intended by the manufacturer and
never tamper with any device to obtain perfor-
mance levels outside the rated specifi cations.
The appliance is fi tted with the controls for use of
its main functions.
Power level knob: to adjust the heating inten-
A)
sity to one of the three levels.
Hot water tap: for regulating the water fl ow.
B)
GB
B
3320040_ut_GB_rev.1
USE AND OPERATION
DESCRIPTION OF CONTROLS
1
A
Power marker
Before use, check that the safety devices
are properly installed and in good working
order.
As well as taking care to meet these require-
ments, users must also implement all safety
regulations and read the description of the
controls and the start-up procedure carefully.
Thermostat light: when on, indicates that the
C)
safety thermostat has tripped. The light goes
out once the appliance has been reset.
Mains light: comes on to indicate that the
D)
electricity supply is on.
ON/OFF marker
3
2
- 8 -
C
D
C
B
D
A
ENGLISH