Safety Regulations - LEM SATURN GEO plus Manual De Instrucciones

Safety Regulations

1 Safety Regulations
This measuring device is only to be installed and operated by qualified
personnel and according to the technical data in compliance with the safety
precautions and regulations set forth below. Additionally, the use of this
equipment requires compliance with all legal and safety regulations
pertaining to each specific application. Similar regulations apply to the use of
accessories.
Operating electrical devices implies that parts of the device carry dangerous
voltages. Disregarding warning notices may lead to serious physical injury
and material damage.
It can be assumed that safe operation is no longer possible if the device
•
shows visible damage,
•
has been exposed to unfavourable conditions (e.g. storage beyond the
permissible climatic limits without adaptation to the ambient climate, dewing etc.) or
•
has been exposed to major strain during transport (e.g. been dropped from
some height without visible external damage etc.).
No measurements must be performed on unprotected measuring circuits.
While a measurement is in progress no earth stake must be touched!
Qualified Personnel
are persons familiar with the setting up, installation, starting off and operation of the
device and possess a formal qualification required for such activities.
- 4 -