Other Functions; General Care - Ruark Audio R2i Manual De Instrucciones

Other functions

Secondary stations
Some DAB stations have secondary services available. This is
shown by a > sign after the station name. Press OK to toggle
between the main station and secondary service.
FM Mode – Auto (Stereo) / Mono
In FM mode the R2i will adopt stereo as its default setting
however for weak stations it is possible to reduce background
noise by switching to Mono. Press and hold OK to switch
between Auto (Stereo) and Mono.
Manual Tune, AutoScan and System Reset
By pressing and holding the INFO key you can cycle through
sub-functions. Press OK to enter each.
● Manual Tune (DAB Mode)
If you know the channel and frequency of a DAB station you
can use this feature to access stations directly.
● AutoScan (DAB Mode)
This performs a new DAB scan and will add new stations as
they become available.
● System Reset (DAB & FM Mode)
This restores default factory settings and will initiate a new
DAB station scan. If you move to a new location it is likely
that the DAB services you will receive may change. Running
system reset will clear stations that are no longer available
and replace with those that are.
A detailed explanation on how to perform AutoScan and System
Reset can be found on the FAQs section of our website.
Cautions
● Listening through headphones or earphones at high volume can
cause hearing loss.
● The unit should not be exposed to dripping or splashing and no
objects containing liquids, such as vases, should be placed on
the unit.
● Ensure that the power adapter, mains plug or mains connector
into the unit is readily accessible in case disconnection from the
mains is required.
● Remote control batteries must not be exposed to excessive
heat, such as from sunshine or fire, and used batteries must be
disposed of responsibly.
● The normal function of this product may be affected by strong
Electromagnetic Interference. If you experience problems, simply
reset the product to resume normal operation. If, after resetting,
the product still fails to operate correctly, try using it in a different
location.
● Keep the unit away from naked flames such as lighted candles
and heat sources such as radiators.
● The unit should be positioned at least 10cm away from adjacent
objects to ensure adequate ventilation.

General care

● Clean with a soft, lint-free duster or slightly dampened cloth. Do
not use wax sprays or other substances as these may damage
the surface finish or impair performance.
● Do not expose your unit to direct sunlight, high humidity, dust,
excessive vibration or extreme temperatures, all of which can
affect the finish, performance and reliability of the unit.
● The recommended operating temperature range is 5°C to 40°C.
● Natural wood finish cabinets will vary and lighten or darken with
age, particularly when exposed to sunlight.
EN
7