HSM 450.2 Instrucciones De Servicio página 11

4 Operation
Switching the paper shredder on
• Pull out emergency-stop.
• Turn main switch to position I.
Green LED lights.
Paper shredder is ready for opera-
tion (standby)
Notice
Safety switches are installed at the
doors. Paper shredder can only be
switched on if the door and the funnel
fl ap are both closed.
Shreds smooth paper and continuous
paper
Notice
The tray can be folded out to hold
stacks of paper or continuous lists.
the cut ting sy stem au to ma tical ly swit ches off af-
ter app rox. 3 sec. and returns to standby.
Swit ching paper shredder off
• Turn main switch to position 0
Secure main switch with a padlock, if
necessary.
0807
• Feed paper. See „Tech-
nical data" for sheet
capacity.
The shredding pro-
cess is star ted by a
pho to –cell in the paper
feeding opening.
When the paper fee d
opening is free again,
HSM 450.2
Notice
The document shredder can also be
started by pressing the green arrow
button:
• Press briefl y:
Cutting device starts.
Automatic stop approx. 3 seconds af-
ter the last piece of paper was drawn
in, or manual stop when the stop but-
ton is pressed.
• Hold down for longer than 2 sec-
onds:
constant operation without light bar-
rier function.
The cutting device runs until it is
switched off with the stop button.
Shredding crumpled paper
• Press the green arrow key.
When you push back the handle the
paper falls into the shredder blades.
• Pull the drum handle
forward and put the
crumpled paper in the
drum.
11