Front Wheel Assembly - topmark T7007 Instrucciones De Uso

ASSEMBLING

FRONT WHEEL ASSEMBLY

Before assembly to the front legs, make sure that the lock mechanism is well
attached each of the front wheel before assembly. Hold one front frame leg, push
the whole of front wheel set until covered with front leg tube and the wheels come
to a stop. Repeat on the other side of front wheels.
EN
FITTING CANOPY
Put canopy hoop front into position and buckle both sides
onto handle tube and also buckle the Velcro on both handle
tubes behind canopy.
FOOT MUFF ASSEMBLY
Unlock the safety buckle, put the safety belts through the holes on the
back side on the foot muff. Lock the buckle again. Find two velcro tape
at the top of foot muff, attach both velcro tape to the back side of
stroller seat.
RAIN COVER ASSEMBLY
Put rain cover on the stroller and make sure it has been fixed by
Velcro.
WARNING:
Be extremely careful when using the rain cover.
Store away from children when not in use. To be used under adult's
supervision. Do not use the rain cover if the stroller is not
fitted with the hood or sun canopy to prevent the risk of
suffocation. To prevent the risk of suffocation, never leave
the stroller with child in it under the sun, with the rain
cover fitted to it. To prevent your child from overheating,
always remove the rain cover when indoor or in warm
environments.
13