Mounting The Table Model (Optionales Zubehör); Mounting The Wall-Mounted Model Accessory Set (Optionales Zubehör) - Krömker TROPIC 2.0 Instrucciones De Uso

EN
6.5.1 Mounting the table model (Optional accessories)
 Note
Now place the adjusting ring of the bottle holder (27) onto the stainless steel pole and fix it in place in the
desired position using the rotary knob. Hang a container with the liquid to be nebulized on the bottle
holder.
The air intake opening of the container should be opened so that the infusion can continue to flow into
the nebulizer chamber.
Mounting the wall-mounted model accessory set (Optional accessories)
6.5.2
26 Stainless steel pole 25 x 600 mm
27 Hinged arm with adjusting ring
28 Bottle holder with adjusting ring
29 Holding-down device with
adjusting ring
30 Rail clamp for standard rail
96200-xxx_00 GA USV Tropic 2.0_20160229.docx
Fit the pole (300 mm long) into the holder at the back of the
-
nebulizer and secure it in place with the locking screw.
Slide the holding-down device (to secure the lid of the nebulizer
-
chamber) and the hinged arm onto the pole and position them
as required.
Avoid a sagging of the patient hose, see 6.4
28
• Attach the bracket and the pole (600 mm long) to a standard
rail (25 x 10 mm) on the wall.
• Fit the TROPIC 2.0 onto the pole using the holder at the back of
the nebulizer and secure it in place with the locking screw.
• Slide the holding-down device (to secure the lid of the
nebulizer chamber) and the hinged arm onto the pole and
position them as required.
26
27
29 30
- 53 -