Clearances - BORETTI Michelangelo Manual De Uso

clearances and dimensions
1. The appliance must have a minimum horizontal clearance from sides and back of unit to adja-
cent vertical combustible construction below and extending above the top of the unit 36 inches
(91,5 cm) from sides and 36 inches (91,5 cm) from back of unit.
2. Do not locate this appliance under any overhead, unprotected combustible construction.
3. This appliance is for outdoor use only. Do not operate in garage, shed, balcony or other such
enclosed areas.
4. Do not restrict or obstruct the flow of combustible and ventilation air to the appliance.
5. Keep the area surrounding the appliance free of combustible materials, gasoline and all flam-
mable liquids and vapors.
6. This appliance is not to be installed in or on recreational vehicles and/or boats.
assembly
Please ensure the proper tools are used for ease of installation.
Some assembly will be required if this unit is installed in a pedestal.
Please remove all components from the packaging and inspect all components to ensure there
is no damage to any components in the packaging. If damage is present please contact you local
dealer for replacement components. Please replace all damaged components with original ma-
nufacturer's parts only, no substitutions will be permitted. Please remove all packaging from all
components of the gas grill before operating.
After the side shelves have been installed, ensure all screws under the side shelves are lock tight
to pedestal.
Make sure all screws under Side
Shelves are lock tight to pedestal.
62