Background lighting
The background lighting on the display switches off after around
5 seconds to save the batteries.
♦
Press the LIGHT button
lighting of the display for approx. 5 seconds.
Battery change display
If the battery symbol is shown on the indoor display
batteries in the weather station should be replaced as soon as
possible (see also the section Operating the weather station).
If the battery symbol appears on the outdoor display
display
of the outdoor sensor, you should change the batteries
in the outdoor sensor as soon as possible (see also section
Operating the outdoor sensor).
Changing the radio channel
Changing the radio channel on the outdoor sensor
You can select between 3 radio channels. Channel 1 is preset.
♦
Open the battery compartment
ance by removing the battery compartment cover .
♦
Select a radio channel by pushing the channel selector
switch
♦
Press and hold the
flashes on the outdoor display .
♦
Press the TX button
radio signal. If reception is successful, the temperature and
humidity will now be displayed on the outdoor display
on the new radio channel.
♦
Close the battery compartment
│
GB │ IE
■
46
to CH 1, CH 2 or CH 3.
button
to manually initiate the outdoor sensor
to switch on the background
on the rear of the appli-
until the reception signal
again.
the
or the
AHFL 433 A1