Noise And Vibration; Declaration Of Conformity - Felisatti APF180/1010E Manual De Instrucciones

10 mm long. Have this done by an Official Service
Centre. We recommend that at every second change
of brushes, you take the machine to one of our Official
Service Centres for general cleaning and oiling.
- Use only Felisatti accessories and spares. Parts the
changing of which is not covered in this instruction
manual, should be replaced in a Felisatti Official Ser-
vice Centre.
Do not dispose of electric tools in
the household waste!
In accordance with European Directive 2002/96/EC
relating to old electrical and electronic appliances and
its translation into national law, used electric tools must
be collected separately and recycled in an ecologically
desirable way.
WARRANTY
See general warranty conditions printed on the attached
sheet.

NOISE AND VIBRATION

This tool has been designed and made to reduce noise
to a minimum. However, in spite of this, in certain
circumstances the maximum noise level in the place
of work could exceed 85 dBA. In this case, the oper-
ator should wear ear protection.
The machine's noise and vibration levels, measured in
compliance with EN60745-1, usually reach:
Acoustic pressure = 90 dB(A)
Sound-power level = 103 dB(A)
Use ear protection!
Vibration acceleration = 2.9 m/s

DECLARATION OF CONFORMITY

We hereby declare, under our sole responsibil-
ity, that the FELISATTI brand products de-
scribed in this manual APF180/1010E comply
with the following standards or standard docu-
ments: EN60745-1:2008,
EN60745-2-4, EN55014-1:2006+A1, EN55014-
2:1997+A1+A2,
EN61000-3-3:2008 in accordance with EU
Directives
2004/108/EC, 2002/95/EC and 2002/96/EC.
12
Jordi Carbonell
Plant Mgr.
We reserve the right to make technical changes 06/2012
2
EN60745-2-3,
EN61000-3-2:2006+A1+A2,
2006/42/EC, 2006/95/EC,
Santiago López
Marketing Mgr.