Included Items - 1 BY ONE 471NA-0010 Manual De Instrucciones

Included Items

EN
Before installing the turntable, check the package contents to ensure all parts below
DE
are included and free of visible damage. Please retain the original packaging materials
for exchange or return purposes.
FR
1 x Turntable Unit
ES
2 x Speakers
IT
1 x Turntable Lid
1 x Slip Mat
1 x Turntable Platter
1 x Tonearm Counterweight
1 x Anti-skating Weight
1 x 45 RPM adapter
Installing the Lid
Insert the hinge pockets of the lid onto the hinges of
the turntable.
Turntable Platter and Belt Setup
1. Remove the protective packaging and ensure the turntable is placed on a sturdy
and level surface.
2. Insert the sub-platter into the turntable spindle located in the middle of the
turntable.
3. Loop the drive belt around the sub-platter and motor pulley.
4. Carefully place the main platter onto the sub-platter (Figure 1).
5. Place the slip mat on top of the platter. Make sure the 1byone logo on the mat is
facing up (Figure 2).
Figure 1
1 x Drive Belt
1 x Sub-platter
1 x Belt Hook
1 x Power Adapter
1 x USB Cable for PC Link
2 x Audio Cables for Speakers
1 x Instruction Manual
Figure 2
4
Cartridge Tracking Force Adjustment
The Counterweight supplied is suitable
for cartridges weighing between 3.0-6.0g.
1. Gently push and turn the Counterweight onto the
rear of the tonearm (with the dial facing toward the
front of the turntable).
2. Remove the cartridge protection cap.
3. Remove the tie-wrap and unlock the tone arm.
4. Lower the tonearm lift lever and position the cartridge in the space between
tonearm rest and platter.
5. Carefully rotate the Counterweight until the tonearm balances out. The tonearm
should return to the balanced position if it is moved up or down. This adjustment
must be done carefully.
Adjust so that tonearm is level
6. Once the tonearm is correctly balanced, return the tonearm to its' rest. Hold the
Counterweight without moving it, and gently rotate the tracking force dial until the
zero is in line with black center line on the rear of the tonearm. Check whether the
arm still balances out.
Counterweight
Tracking Force Dial
Center Line
Counterweight Tonearm
5
EN
DE
FR
ES
IT